![]() Round distributor, water outlet on center of cylinder head, fails pencil test All post war blocks will fail the pencil test.ĭivers Helmet distributor, water outlet on center of cylinder head, passes pencil testĬrab-Style distributor, water outlet on center of cylinder head, passes pencil test The shelf is deep enough to horizontal lay a pencil on it. This pre war blocks have a tiny shelf above the timing cover. This design was keept till the end of the US flathead production line in 1953.Īll pre WW2 flathead engines, including the 21 stud, will pass the so called "Pencil Test". In 1949 the outlet moved to the front of the engine (left picture). 1938 to 1948 cylinders had the water outlet in the middle of the head (see right picture below). The water outlet design on the cylinder heads was changed in 1949. All three distributor styles are located on the middle of the front side of the engine.Īll 1949-up engines have a modern style distributor located on the top front of the engine. The 1946 to 1948 engines had the round style distributor. The 1942 to 1945 engines had the Crab-Style distributor (see picture below). ![]() This distributor applies to all engines from 1932 to 1941, so for the 24 stud engines we are looking at, all 1938 to 1941. The earlier models have, like all 21 stud engines, a so called Divers Helmet distributor (sometimes called Eggshell distributor). 21 stud with Divers Helmet or Eggshell Distributor
0 Comments
Leave a Reply. |